If changing the plug did not resolve the issue and the router still fails to detect the Ethernet cable, it is worth considering the possibility of a faulty cable. To determine if the cable is the culprit, it is recommended to replace it with a different one. Firestick not recognizing Ethernet connection: If your Firestick does not detect the Ethernet connection, ensure that you have followed all the steps of the setup process correctly. Double-check that the Ethernet cable is firmly connected on both ends. Restarting both the Firestick and the router or modem can also help refresh the network Machines connected to the E4200 wireless router tend to get assigned DHCP addresses from the E4200 since it responds fastest, leaving them with no Internet access because the DPC3825 is the router managing your Internet connection. If my guess is right, the fix is simply to disable the DHCP server in the E4200. It could be worse. Disconnecting the hub-computer cable and plug it back in --- the connection is up and running within 3 or 4 seconds as expected. Disconnecting the hub-router cable and plug it back in --- The computer (Windows really) thinks everything is connected, but the actual connection takes 40-60 seconds to come back up. ** Update **. Open Settings. Click on Network & Internet. Click on Status. Under the "Change your network settings" section, click the Network reset option. Click the Reset now button. Click the Yes button. -Click Start, type CMD and run as administrator. -Copy and paste each of the commands below and hit enter. netsh int ip reset. Solution 3 - Restart the router and check Ethernet cable. After performing the steps above, turn off your router or modem and switch it back on after five minutes. Now check if your PC has the valid IP configuration. If it still does not work, connect your router to your PC using a different Ethernet cable. km5Z9F.

router not recognizing ethernet cable